Remote control commands
96 Retrieve Fax
1 Memory Status List
2 Retrieve all FAX
3 Erase FAX in the
memory
97 Check the receiving status
1 Document
2 Voice
98 Change Answer Mode
1 MC
2 F/T
3 FAX
90 Exit
74
Chapter 12
Detail Operation
Enter the number of a remote fax machine to receive a report
or stored fax messages. (See Retrieving the Memory Status
List, page 75 and Retrieving Fax Messages, page 75.)
If you hear one long beep, you can erase the fax message
from the memory.
You can check whether your fax machine has received any
Document or Voice messages. If yes, you will hear one long
beep. If no, you will hear three short beeps.
If you hear one long beep, you can change the answer mode.
If you hear three short beeps, you cannot change it.
(Example: There is no MC MSG when you want to change to
MC mode.)
After a long beep, you can exit remote control.