Section 7 Troubleshooting Information - Okuma OSP-E100 Instruction Manual

SECTION 7 TROUBLESHOOTING INFORMATION

(1) On the TROUBLESHOOTING INFORMATION screen, press function keys [F1] to [F6] accord-
ing to the function you want to call. The information which will help you check and troubleshoot
the problem is displayed.
• To check the alarm occurrence time and nature of alarm:
ALARM HISTORY
• To check the alarm occurrence time and type of operation involved:
OPERATE HISTORY
a. [F3] (ALARM HISTORY)
The alarm history is displayed on the screen. At each occurrence of an alarm, the data
which identify the alarm are logged - date, time, alarm number, alarm code, and alarm
character string.
It is possible to output the alarm history to the floppy disk.
b. [F4] (OPERATE HISTORY)
The screen shows two kinds of operation histories. The operation history can be also out-
put to the floppy disk.
OPERATING PANEL : NC operation panel keys that have been pressed
I/O SIGNALS
(2) You can output the trouble information to the floppy disk.
• Simply press function key [F6] (
disk. The information presently displayed is output. The device name and the file name are
set on the PARAMETER SETTING screen. With the setting made at the shipping, date is
entered to the file name.
SECTION 7 TROUBLESHOOTING INFORMATION
: ON/OFF status of the I/O signals
File), and the trouble information isoutput to the floppy
4345-E P-26
Eeospkku7002
EIOSPKKU7001R01