Period Machining Report - Okuma OSP-E100 Instruction Manual

3.

Period Machining Report

(1) The machining result of the main programs having been selected up to today is displayed for
each main program in the order the main programs selected later (START TIME).
• The first line in the first page shows the machining result of the main program presently
selected.
• One page of the report display shows the machining report of up to 16 main programs. In
this report.
• If the total number of the selected main programs exceeds 13, the report is given on the fol-
lowing pages which are accessible by pressing a cursor key or a page key. The functions of
the cursor keys and the page keys are the same as those used in the MACHINING
REPORT (TODAY) screen.
(2) The period machining report function is able to store the machining result information for up to
91 main programs, including the main program selected presently.
• If the memory has already stored the machining result information for 91 main programs,
selection of a new main program will cause the machining result information of the oldest
main program among the stored 91 main programs to be deleted. The machining report of
the newly selected main program is created instead.
• The machining report (today) is created by extracting the machining report of the main pro-
grams for which the START DAY is today from the period machining report.
• The machining report (pre day) is created by extracting the machining report of the main pro-
grams for which the START DAY is previous day from the period machining report.
SECTION 4 MACHINING REPORT DISPLAY
4345-E P-17
Eeospkku4003
EIOSPKKU4007R01