Machining Status - Okuma OSP-E100 Instruction Manual

1.

Machining Status

(1) On the screen, whether or not a program has been selected is indicated by "START" and
whether or not a program is being executed is indicated by "OPERATING".
The area indicating the status explained above is common to all display screens.
A main program has not been selected (NOT START status).
To be set by selecting "REPORT/PRINTER" on the PREFERENCE SETTING screen.
The default machine name is "MC.NAME".
Date and time (today, current time)
A main program has been selected (START status).
The main program has been selected (START status).
A main program is not being executed (NOT OPERATING status).
The reason for "not-operating status" is in-process setup.
Selecting a program
A main program is not being executed (NOT OPERATING status).
The reason for "not-operating status" is in-process setup.
Reason for "not-operating" is displayed here:
IN-PRO SETUP, NO OPERATOR, PART WAITING, MAINTENANCE, or OTHER
Executing the program
The main program is being executed (OPERATING status).
After the completion of the main program execution,
the machine enters the NOT OPERATING status due to in-process setup.
SECTION 2 MacMan MAIN SCREEN
Eeospkku2002
4345-E P-5
EIOSPKKU2002R01