3. Install the:
a.
Heat sink assembly
b.
Hard drive and optical drive module
c.
HDD assembly
d.
Front bezel
e.
Side cover
4. Follow the procedure in
Power switch
Removing power switch
1. Follow the procedure in
2. Remove the:
a.
Side cover
b.
Front bezel
c.
HDD assembly
d.
Hard drive and optical drive module
3. To remove the power switch:
a. Disconnect the power switch cable from the system board [1].
b. Press the power switch retention tabs and pull the power switch out from the system [2] [3].
48
Removing and installing components
After working inside your
Before working inside your
computer.
computer.