Table of Contents
Advertisement
SEQUOIA_U.book Page 472 Friday, January 25, 2008 11:27 AM
4-3. Do-it-yourself maintenance
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Turn the engine switch off.
The fuses are located in the following places. To check the
fuses, follow the instructions below.
Engine compartment
Under the instrument panel
After a system failure, see "Fuse layout and amperage rat-
ings" (→P. 475) for details about which fuse to check.
472
SEQUOIA_U_(L/O_0804)
Push the tab in and lift the lid
off.
Remove the lid.
Advertisement
Table of Contents
