Toyota Sequoia 2008 Manual page 147

SEQUOIA_U.book Page 149 Friday, January 25, 2008 11:27 AM
Changing shift ranges in S mode
Shift the shift lever to the S position and operate the shift lever.
The initial shift range in S mode is automatically set to 5 or 4 accord-
ing to vehicle speed. However, the initial shift range may be set to 3
or 2 if the AI-SHIFT has operated while the shift lever was in the D
position. ( → P. 150)
n Shift ranges and their functions
Shift range
6
5
4
3
2
1
A lower shift range will provide greater engine braking forces than a higher
shift range.
SEQUOIA_U_(L/O_0804)
Upshifting
Downshifting
Function
Automatically selecting gears between 1 and 6
according to vehicle speed and driving conditions.
Automatically selecting gears between 1 and 5
according to vehicle speed and driving conditions.
Automatically selecting gears between 1 and 4
according to vehicle speed and driving conditions.
Automatically selecting gears between 1 and 3
according to vehicle speed and driving conditions.
Automatically selecting gears between 1 and 2
according to vehicle speed and driving conditions.
Setting the gear at 1.
2-1. Driving procedures
2
149