Table of Contents
Advertisement
SEQUOIA_U.book Page 456 Friday, January 25, 2008 11:27 AM
4-3. Do-it-yourself maintenance
Wait for several minutes with the engine switch on, and then
turn the engine switch to the ACC or LOCK position.
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code of tire pressure
warning valve and transmitter. Have the ID code registered by your
Toyota dealer.
When to replace your vehicle's tires
n
Tires should by replaced if:
You have tire damage such as cuts, splits, cracks deep enough to
l
expose the fabric or bulges indicating internal damage
A tire goes flat repeatedly or cannot be properly repaired due to the
l
size or location of a cut or other damage
If you are not sure, consult with your Toyota dealer.
456
SEQUOIA_U_(L/O_0804)
Push and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly three times.
Advertisement
Table of Contents
