Toyota Sequoia 2008 Manual page 540

SEQUOIA_U.book Page 547 Friday, January 25, 2008 11:27 AM
Lubrication system
4.7 L V8 (2UZ-FE) engine
Oil capacity
drain and refill
(Reference)
With filter
Without filter
Oil grade
Recommended oil
viscosity
*: 5W-30 is an oil that provides optimal levels of fuel efficiency.
Oil viscosity
l The 5W portion of the oil viscosity rating indicates the characteristic
of the oil which allows cold startability. Oils with a lower value before
the W allow for easier starting of the engine in cold weather.
l The 30 in 5W-30 indicates the oil viscosity when the oil is at its
operating temperature. An oil with a higher viscosity may be better
suited if the vehicle is operated at high speeds, or under extreme
load condition.
SEQUOIA_U_(L/O_0804)
6.6 qt. (6.2 L, 5.5 Imp.qt.)
6.0 qt. (5.7 L, 5.0 Imp.qt.)
ILSAC multigrade engine oil
Use Toyota approved "Toyota Genuine Motor
Oil" or equivalent to satisfy the grade and
viscosity shown below.
Outside temperature
6-1. Specifications
6
547