Mixing, Filling And Calibration - Micron Ulva+ Instruction Manual

MIXING, FILLING AND CALIBRATION

Mixing and filling is generally the most hazardous process in the spraying operation.
Always follow the label instructions. Always use a filter (fitted in the Micron Mi-
cropak backpacks) and use a funnel if directly filling the spray bottle. Only mix
enough spray for the area to be treated if using water-based mixtures to avoid the
need for disposal of unused spray mix.
Always wear gloves when handling
agrochemicals and equipment.
Always wash off any skin
contamination
ULV FORMULATIONS
ULV formulations are pre-mixed, i.e. ready to spray, and should have full
instructions for use on the label. These products can be poured directly into the spray
bottle using a funnel, if using the one litre twin neck bottle, or directly into the
backpack.
Always use the correct equipment
when mixing and measuring.
Always clean all equipment after
use.
4