Heated Bed Mat (Option); Slideout Room Option; Components - Jayco Jay Feather 2005 Owner's Manual

Setting Up Camp...

HEATED BED MAT (OPTION)

Your heated RV Bedding has been carefully designed and manufactured to provide years
of relaxing, comfortable sleep. The bedding is manufactured to reach gentle, soothing heat
warmth, NOT the pain relieving heat of a heating pad. At first touch it may seem only
slightly warm because it's conserving energy inside for you, but as your body weight
presses onto the bedding, and a blanket covers you, it will feel considerably warmer and
comfortable.
Caution: Be sure to read all instructions carefully before using this bedding.
• YOUR BEDDING SHOULD ALWAYS REMAIN FLAT, NEVER FOLDED,
ROLLED OR BUNCHED. EXCESSIVE HEATING MAY OCCUR FROM
MISUSE.
• Place the bedding on the mattress, box spring or platform with the label and
connector up.
• The cord should be at the head of the bed.
• Do not tuck in the wired area of the bedding.
• Let the cord hang free - DO NOT route electrical cords between the heated RV
bedding and the mattress, box spring or base platform. Do not allow the cords to be
pinched. NEVER pull the mat by its cord.
• Keep the control away from an open window.
• Do not use pins or any heavy, sharp pointed objects on the bedding. They may
damage the heating elements.
• Be sure this bedding is used on an alternate - current supply circuit of the proper
voltage.
• Turn off the electric current when this bedding is not in actual use.
• If improper operation of this bedding is observed, discontinue its use immediately
and consult your independent, authorized dealer or the manufacturer. The bed mat is
manufactured by Flair Interiors. They can be reached at 574-534-2163 or at their
website, www.flairinteriors.com.
• This appliance has a polarized plug (one blade is wider than the other) as a safety
feature. This plug will fit into a polarized outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
Refer to the maintenance chapter for complete care instructions.

SLIDEOUT ROOM OPTION

The slideout room is designed for additional floor space and comfort. Mechanical
components are gear driven. Read ALL slideout instructions before operation.
I
CAUTION: Do not place excessive weight in the slideout room. It can
cause the slideout room to malfunction and cause damage to the
slideout.

Components

The slideout system has numerous major components and are as follows:
• One inner rail drive assembly to support the room weight.
40 Jay Feather Conventional Travel Trailer