Safety Instructions For The Hot Air Blower; Safety Information For Solid Fuel Lighters; Additional Safety Instructions - Parkside PUV 2000 B1 Translation Of The Original Instructions

Safety instructions for the
hot air blower
NOTICE!
► This tool must be placed on its stand when
not in use .
■ Careless use of the appliance can cause a fire .
■ Take care when using the appliance in the
vicinity of inflammable materials .
■ Do not aim at the same place for a prolonged
period of time .
■ Do not use in the presence of an explosive
atmosphere .
■ Heat can be transferred to combustible mate-
rials which are hidden from view .
■ Replace on stand after use and allow to cool
before putting it away .
■ Do not leave the appliance unattended while it
is in operation .
Safety information for solid fuel
lighters
■ Check that the solid fuel lighter is in the correct
position .
■ Disconnect from mains before removing from
fire .
■ Allow solid fuel lighter to cool down before
packing away .
■ The power cable or other flammable materials
may not come into contact with hot components
of the solid fuel lighter .
■ 4 │ GB │ IE │ NI

Additional safety instructions

CAUTION! Avoid the risk of injury or fire as well
as health risks:
■ In case of danger, remove the plug from the
socket immediately .
CAUTION! RISK OF INJURY!
► Never use the appliance as a hair dryer .
■ Never aim the hot air stream at people or
animals .
■ Never look directly into the nozzle opening at
the outlet .
CAUTION! RISK OF BURNS!
► Do not touch the hot nozzle .
■ Wear protective gloves .
■ Wear safety goggles .
■ Always remove the plug from the power socket
during work breaks, when adjusting the appli-
ance (e .g . changing nozzles) and when it is no
longer in use .
■ Keep the nozzle at a distance from the work-
piece or the area being processed . A build-up
of hot air can result in damage to the appli-
ance .
■ The appliance must always be kept clean, dry
and free from oil or grease .
■ Never use the appliance for purposes other
than the ones for which it was designed .
PUV 2000 B1