Vermeiren Forest Instruction Manual page 31

3.3.3 Adjusting the seat width
L L L L
WARNING:
Risk of tipping over - Check that the armrests and footrests are
positioned identically on each side.
The seat width can be adjusted by moving the armrests and footrests in horizontal direction.
* Adjusting armrests:
L L L L
WARNING:
Risk of injury - Keep a safe distance of 25 mm of the armrest tube
in the tube of the seat frame
* Adjusting footrests:
L L L L
WARNING:
Risk of injury - Keep a safe distance of 25 mm of the footrest tube
in the tube of the seat frame
.
1. Loosen the screws
frame on each side.
2. Move the armrest in an horizontal direction
until the correct seat with, by moving the
square tubes
(Range 50 mm on each side: stepless)
3. Retighten the screws
4. Repeat instructions above for the other
armrest.
.
1. Loosen the hexagon socket set screws
on the front just below the seat frame on
each side.
2. Move the footrest in an horizontal direction
until the correct seat width. (range 100 mm
on each side: stepless)
3. Retighten the hexagon socket set screws
properly.
Page 29
Forest, Forest Narrow
2012-12
just under the seat
and over each other.
properly.