English - Braun Syncro 7680 User Manual

English

4
• Wattage via low voltage cord: 7 W
• Power supply via mains adapter, input voltage:
• Shaver input voltage: 12 V
• First charging: Using the power supply cord set,
• A full charge will give up to 50 minutes of cordless
+35°C
+15°C
• Best environmental temperature range for charging is
• Do not expose the shaver to temperatures of more than
Our products are designed to meet the highest standards
of quality, functionality and design. We hope you enjoy
your new Braun shaver. Your Braun Syncro is supplied
with a Braun Clean&Charge (please see separate use
instructions).
SmartLogic Inside
The «SmartLogic» electronics inside your shaver analyzes
your personal shaving patterns and the type of beard you
have, and then adapts the battery care and cleaning cycles
to ensure optimal performance.
Warning
Your shaver is provided with a low voltage adaption
system. Therefore you must not exchange or manipulate
any part of it. Otherwise there is risk of electric shock.
Technical specifications:
100-240 V2/ 50 or 60 Hz (automatic adaptation)
Description
1 Foil protection cap
2 Shaver foil
3 Cutter block
4 Foil release button
5 Long hair trimmer
6 Switch
Charging the shaver
connect the shaver to the mains with the switch on
position «0» and charge it for at least 4 hours
(plug might get warm). From now on, the «SmartLogic»
inside your shaver will ensure optimal care of the battery.
shaving time depending on your beard growth.
However, the maximum battery capacity will only be
reached after several charging/discharging cycles.
15 °C to 35 °C.
50 °C for longer periods of time.
7 Display
8 Info key
9 Pilot light
10 Shaver socket
11 Power supply cord set