Table of Contents
Advertisement
PCI DUAL LPT & RS232
Serial Solutions For DOS.
Serial Solutions for DOS consists of the following
programs: -
NewCOM.sys
NewCOM24.sys A device driver providing support for 24 ports.
NewCOM32.sys A device driver providing support for 32 ports.
NewMode.exe
EASY programs. The EASY disk contains short, simple to
Chapter 1 Page 4
A device driver, it supports COM1 to COM16,
allowing 16 serial ports to be used under DOS.
It also includes an interrupt handler for
enhanced performance with user definable
buffer
sizes.
languages, it is the heart of the Serial Solution.
It
has
extensive
implementing both hardware
using any combination of the DTR, DSR, CTS,
RTS, and DCD lines, and a software handshake
using the XON/XOFF protocol.
A replacement for the DOS 'mode com...'
command. NewMode is used to set the serial
parameters, including the port address, IRQ
line used, the baud rate, parity and data and
stop bit options.
e.g. NEWMODE COM5:38400,E,7,1 01A0 7
Baud rates supported are from 110 baud to
115,200 baud! Included is a very handy query
mode that reports the settings of the various
serial ports. Flexible and fast!
understand and use EASYBAS, EASYC and
ASYPAS
programs,
forward, file type I/O to serial ports with debug
information. Use these FIRST, base your
sample applications on them.
Accessible
from
handshaking
providing
Serial Solutions
all
DOS
support,
handshaking
straight
Advertisement
Table of Contents
