Viscount Canticus 50 Quick Manual page 48

press [PLAY] again to continue.
To stop the playback, press [START-STOP] again; press [EXIT] or [PLAY] to exit the sequencer
and return to the main menu.
Setting a voice in Local Off mode means that it will not be played by the organ's internal sound
generation system but the relative MIDI message is sent (System Exclusive) so that it can be turned
on and played on a connected instrument.
To set Local Off for a voice press [S] (Set) and, keeping it down, press [C] (Cancel). All the stops
will come on and the display will show the page:
To set a voice in Local Off mode, pull its drawknob so that the light goes out. After creating the set
up required, press [S] and [C] together to save it. Accessing the Local Off setting function after this
will trigger display of the status of the voices as follows:
»
Light on: voice in Local On mode (sound generated internally)
»
Light off: voice in Local Off mode
In normal operation, when a voice in Local Off is turned on, the drawknob flashes twice and then a
fixed light stays on.
6. VOICE LOCAL OFF
EN - 20
Quick Guide – Viscount Canticus50