Viscount Canticus 50 Quick Manual page 35

Viscount Canticus 50 – Quick Guide
2.2 CONTROLS FOR THE MANUAL THUMB PISTONS
1. [S] button: "Set" button which enables memory saving. To save a memory, simply press the
[S] button and, keeping it pressed down, then press the button of the memory you wish to save.
2. MIDI TO section: this section contains the buttons used to activate transmission of the MIDI
note codes on the channels of each manual and the pedal board. The button will light if the
transmission of note codes of the relativi MIDI channel is enabled.
3. Memories: this section contains the instrument's general memories.
The memories also include an [HR] button, also known as 0, which recalls the set up that was
present before a memory was activated. The contents of [HR] are not affected by calling up a
memory when another one has previously been activated.
In each memory the following can be saved
» the voices
» the couplers
» the Tremulants (also with different speed and depth by activating this function on
Menu Set-Up, see par. 6.1)
» the MIDI To controls and Program Change set using the SEND PROGRAM CHANGE
function
» the Enclosed and Automatic Pedal
4. [ENC] button: pressing this button activates the Enclosed function used to control the organ's
general volume by means of the [MAN.II] pedal.
5. [A.P.] button: this button enables the Automatic Pedal, used to play the voices of the pedal
board using the first 32 notes of Man.I. In this case, the organ pedal board is deactivated and the
voices become monophonic, with priority given to the lowest note.
6. [T] button: "Tutti" button, which turns on a preset series of voices and couplers.
EN - 7