Notices - Boundless ADDS 3153 LF ASCII Manual To Operations

How to Connect/Disconnect the Terminal
To Connect:
First, turn everything OFF.
Attach all cables to devices.
Attach signal cables to receptacles.
Attach power cord to outlet.
Turn device ON.
Note: In the UK, by law, the
telephone cable must be connected
after the power cord.

Notices

References in this publication to Boundless Technologies products, programs, or services do not imply that
Boundless Technologies intends to make these available to all countries in which Boundless Technologies
operates. Any reference to an Boundless Technologies product, program, or service is not intended to state or
imply that only Boundless Technologies product, program, or service may be used. Any functionally equivalent
product, program, or service that does not infringe any of Boundless Technologies' intellectual property rights
may be used instead of Boundless Technologies product, program, or service. Evaluation and verification of
operation in conjunction with other products, except those expressly designated by Boundless Technologies, are
the user's responsibility.
This publication could contain technical inaccuracies or typographical errors.
This publication may refer to products that are announced but are not currently available in your country.
Boundless Technologies makes no commitment to make available any unannounced products referred to herein.
The final decision to announce any product is based on Boundless Technologies' business and technical
judgment.
The drawings and specifications contained herein shall not be reproduced in whole or in part without the written
permission of Boundless Technologies.
To Disconnect:
First, turn everything OFF.
Remove power cord from outlet.
Remove signal cables from receptacles.
Remove all cables from devices.
You may now take it with you.
Note: In the UK, by law, the power
cord must be disconnected after the
telephone line cable.
How to Connect/Disconnect the Terminal iv