Table of Contents
Advertisement
Keyboard: F4
Language: [U.S., U.K., Danish, Finnish, French, German, Norwegian, Portuguese, Spanish, Brazilian, Swedish, Dutch, Belgian-Flemish,
Fr-Canadian, Italian, Latin American, Swiss-French, Swiss-German, Turkish, Greek, Hungarian, Czech, Slovak, Polish, Rumanian, Slovenian,
Croatian, Bosnian, Serbian Latin, Russian, Hebrew]
Select the language type which matches your keyboard's layout.
Language: [U.S., U.K., Danish, Dutch, Finnish, Belgian-Flemish, French, Fr-Canadian, German, Italian, Norwegian, Spanish, Swedish,
Swiss-German Swiss-French, Turkish]
Select the language type which matches your keyboard's layout.
Char Set Mode: [PC, ANSI, ASCII]
Choose which NRC set to use. This selection is only available in National Mode and foreign languages. In VT
emulations, the default is ANSI. To determine which sets are loaded for each mode, refer to the 3153
Programmer's Reference Guide.
Key Mode: [ASCII, ScanCode]
Select whether keys transmit ASCII codes or the ScanCode. The ScanCode transmits a "make code" when a key
is pressed and a "break code" upon its release. When ScanCode is selected, "Comm Mode" is forced to Full
Duplex and "Character Set" is forced to Multinational (8-bit).
Keyclick: [On, Off]
Choose whether pressing a key results in a clicking sound. The default is off in SCO Console emulation.
Key Repeat: [On, Off]
Choose whether keys, including function keys, will repeat when pressed for more than half a second. This
setting does not affect the following keys on the keyboard:
Caps Lock, Scroll Lock, Num Lock, Shift keys, Ctrl keys, Alt keys, Return, Print Screen, Pause.
Lock, F1-F5, Shift keys, Control, Compose, and Return.
Key Rate: [15 cps, 20 cps, 30 cps]
When "Key Repeat" is on, a key that is pressed for more than half a second will automatically repeat. This
selection allows you to choose the number of characters that are generated per second when a key is auto
repeating.
Keyboard Layout: [Q, F]
This selection is only available when Turkish keyboard is selected. Q and F refer to the two Turkish keyboard
layouts available. Q and F correspond to the top left key on the alphanumeric keypad.
Margin Bell: [On, Off]
Choose whether a bell tone sounds when the cursor is nine positions away from the right margin.
Key Lock: [Caps, Reverse, Shift]
- this setting affects the state of alphanumeric keys when Caps-Lock is engaged.
Caps causes alphabetic keys to be uppercase regardless of the Shift key.
Reverse means that pressing the Shift key will generate lower-case alphabetic keys.
Shift causes all alphanumeric keys to be generated as uppercase (or shifted, in the case of numbers). If the
Shift key is hit, while Shift is selected, Caps-Lock will be disengaged.
Caps Lock: [Toggle, Always On, Always Off]
This setting effects the state of the Caps Lock key. When set to always on or always off the key has no effect.
When set to toggle, the terminal will power on in the off mode and pressing the key will alternate between the off
mode and the on mode.
Num Lock: [Toggle, Always On, Always Off]
This setting effects the state of the Num Lock key. When set to always on or always off the key has no effect. When
set to toggle, the terminal will power on in the off mode and pressing the key will alternate between the off mode
and the on mode.
Code Page: [DEC Multi, PC 437, PC 850, PC 852, PC 857, PC 860, PC 861, PC 862, PC 863, PC 865, PC 866, PC 869, ISO-1, ISO-2, ISO-5,
ISO-Hebrew, ISO-Cyrillic, ISO-Greek]
This selection is only available in 8-bit emulations in Multinational Mode. The default code page is based upon
language and emulation selected. To determine which sets are loaded for each code page, refer to the 3153
Programmer's Reference Guide.
Setup
30
Advertisement
Table of Contents
