Table of Contents
Advertisement
Keys: F5
Enter Key: [CR, CR-LF, TAB]
Select the code the enter key in the numeric keypad transmits.
Return Key: [CR, CR-LF, TAB]
Select the code the return key on the main alphanumeric keypad transmits.
Alt Key (left): [Meta, Legend, Funct, Scroll-Lock, Alt Key]
Select the way in which the left ALT key behaves. In ANSI emulations, Compose is available as a selection instead
of Legend. The Alt Key selection refers to the right Alt key.
Meta - sets the most significant bit for the next character and allows 8-bit data to be generated from the
keyboard.
Compose - precedes sequences of keys to create a character that is not on the keyboard but is available in
the active character set.
Scroll Lock - causes the Alt key to function as the Scroll Lock key, and is a toggle to hold/free data on the
screen. It requires the use of flow control for the host port "Rcv Prtcl".
Funct - causes the Alt key to function as the Funct key on an ASCII keyboard.
Alt Key causes the left Alt key to behave identically to the right Alt key.
Pound Key: [U.S., British]
Choose the character transmitted for 23h: the US pound (#) or the British pound (£).
Return Key Repeat: [On, Off]
Select whether the Return key located on the alphanumeric keypad will repeat when held down for more than
half a second (only selectable when "Key Repeat" = On).
Return Key: [Field, New Line]
When the Return Key =New Line, the functions specified in the New Line parameter are performed. When the
Return Key = Field, the functions specified in the New Line parameter are performed unless the target line is
within a protected field. The cursor will then move to the first character position of the next unprotected field.
Enter Key: [Send, Return]
The Enter Key can be defined to be either a Send or Return Key.
New Line: [<CR>, <CR><LF>]
This parameter specifies the codes generated when the return key is pressed.
Send Key: [Page, Line]
The contents of the current page is sent to the host when the Send Key is pressed and Send Key is selected for
page. The Contents of the current line is sent to the host when the Send Key is pressed and Send Key is selected
for line.
Insert Character: [Mode, Space]
Mode – enters insert mode when the insert key is pressed.
Space – a space character is inserted at the current cursor position when the insert key is pressed.
Local Leadin: [On, Off]
This parameter is only available when Key Mode (in the Kybd menu) is ScanCode. If Local Leadin is off, the only
local function (Appendix A) that is available is Ctrl-Scroll Lock to enter Setup. If Local Leadin is on, the Setup
keystroke "introduces" the keystroke as local and then local functions can be generated using the keystrokes
listed on page A-1. For example, to enter Setup when ScanCode and Local Leadin are on, press Ctrl-Scroll Lock to
introduce this as a local function , and then Ctrl-Scroll Lock to enter Setup.
Local Leadin will not work if Comm Mode is set to Half Block or Full Block.
PC Keyboard
Disconnect: [Disabled, Pause, Alt-Pause]
Select the keystroke that will generate a modem disconnect.
Backspace: [BS/DEL, DEL/BS, DEL/CAN, BS/BS]
Choose the codes sent by the backspace key in the normal/shifted positions.
Desk Acc: [Sh-Ctrl-Fkeys, Ctrl ←, Disabled]
Setup
31
Advertisement
Table of Contents
