Table of Contents
Advertisement
This equipment complies with the FCC Regulation for Class A devices, Subpart J of Part 15. Shielded, grounded interface
cables were used on all ports for FCC radiated emission testing.
The manufacturer is not responsible for any violation of the FCC Regulation for Class A devices that is caused by
unauthorized modification of the equipment, or caused by equipment installation not in accordance with the instructions
in this manual.
This equipment generates, uses, and can radiate radio frequency energy and may cause radio or television interference.
All user equipment that interfaces with other products should be connected with shielded cables. (Contact a local dealer
for more information on shielded cable assemblies and their availability.)
There is no guarantee that interference will not occur. If radio or television interference occurs (this can be determined by
turning the equipment off and on while the radio or television is on), the user is solely responsible for correcting the
interference and is encouraged to take one or more of these measures:
1.
Reorient the receiving antenna.
2.
Relocate the equipment, or move the equipment away from the receiver.
3.
Plug the equipment into a different outlet so the unit and receiver are on different branch circuits.
4.
Consult the dealer or an experienced radio/television technician.
It is also suggested that the user read the FCC booklet entitled "How to Identify and Resolve Radio-TV Interference
Problems". The booklet is available from the US Government Printing Office, Washington, DC 20402. (When ordering the
booklet, specify stock number 04-000-00345-4.)
Site Preparation
The screen display geometry on terminal products is aligned using magnetic devices. External magnetic fields created by
other types of electronic equipment, such as printers, in very close proximity to the terminal, may cause minor display
distortion.
Examples of display distortion include:
Shaky video
Wavy lines
Tilted display
This magnetic field interaction only occurs over a very short distance, normally less than twelve inches, and can be corrected by separating the
equipment and/or slightly reorienting the display.
Questions about this product should be directed to the Technical Support Department of the distributor from
which you obtained your Boundless Technologies equipment. When requesting assistance, please have all
pertinent information available including any error messages that may have appeared either on the terminal or
the host.
If your distributor fails to provide adequate support for your needs, please contact the Boundless Technologies
Technical Support Department directly. You will be required to provide the name of your distributor, and a
description of the problem as described above.
Please refer to the Boundless Technologies Guide to Support Services which was packaged with the terminal.
Boundless Technologies can be reached at:
Boundless Technologies, Inc.
Technical Support Department
50 Engineers Lane, Unit 2
Farmingdale, NY 11735-1208
(800) 231-5445 ext. 1498 (voice)
(631) 962-1505 (fax)
Email:
support@boundless.com
ftp:
ftp.boundless.com
Web site:
http://www.boundless.com
Note To Installer
Technical Support
(631) 962-1498
Note To Installer
52
Advertisement
Table of Contents
