Surface Mounting; Gutter Mounting - Hunter Rain-Clik Owner's Manual

Wireless sensor

Hide thumbs Also See for Rain-Clik:

Table of Contents

Mounting the Sensor

Surface Mounting

Using the screws provided with your sensor, mount the

transmitter on any surface where it will be exposed to

unobstructed rainfall, but not in the path of sprinkler

spray. The sensor should be oriented upright (as pictured),

but the swivel bracket can be moved for mounting on

any angled surface. Loosen the locknut and screw before

swiveling the bracket, and then re-tighten.

The SGM allows the transmitter to be mounted

directly to the edge of a gutter. Install the SGM on

the transmitter by removing the metal extension arm

supplied with your sensor and reinstalling the SGM.

Position the gutter mount on the edge of the gutter and

twist the thumbscrew to secure it in place.

Surface Mount

SGM

Gutter Mount

Table of Contents