AXIS P13 Network Camera Series
Setup
Setup
Need more help?
You can access the built-in help from the device's webpage. The help provides more detailed information on the device's features and
their settings.
Replace the lens
1. Stop all recordings and disconnect power from the product.
2. Disconnect the lens cable and remove the standard lens.
3. Attach the new lens and connect the lens cable.
4. Reconnect the power.
5. Log in to the product's webpage, go to the Image tab and then select the P-Iris lens you have installed.
Note
If you use a DC iris lens, select Generic DC Iris.
6. For the changes to take effect, you need to restart the device. Go to System > Maintenance and click Restart.
7. Adjust the zoom and focus.
8. Loosen the four spring loaded thumb screws.
9. Use the IK10 tool to set the distance between the window and the lens.
10. Tighten the four thumb screws.
7