Specifications; Sd Card Slot - Axis P13 Series User Manual

AXIS P13 Network Camera Series

Specifications

Specifications
To find the latest version of the product's datasheet, go to the product page at axis.com and locate Support & Documentation.
LED Indicators
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go to Settings > System > Plain config.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Settings > System > Plain config.
• The LEDs turn off when you close the casing.
Status LED
Unlit
Green
Amber
Amber/Red
Red
Status LED behavior for focus assistant
Note
Only valid for optional P-iris, DC-iris or manual iris lenses.
The status LED flashes when the Focus Assistant is active.
Color
Red
Amber
Green

SD card slot

NOTICE TICE
NO NO TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Indication
Connection and normal operation.
Steady green for 10 seconds for normal operation after startup completed.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
Firmware upgrade failure.
Indication
The image is out of focus.
Adjust the lens.
The image is close to focus.
The lens needs fine tuning.
The image is in focus.
19