HighSecLabs SX42 U-3 Series Quick Setup Manual page 5

Table of Contents
SECTIONS
INTRODUCTION
Before Installation
Unpacking the Product
•
Before opening the product's sealed packaging,
inspect the seal's condition to assure that the
product was not accessed or tampered with
during delivery. If the packaging seal looks
suspicious contact the HSL support team and do
not use the product.
•
After seal removal, inspect the packaging content
to verify that the required components are
included. See the packaging content list on page 4
above.
•
After the Mini-Matrix KVM Switch is removed from
its packaging materials, carefully inspect the
tampering-evident label to assure that product is
properly sealed. If the label is damaged or missing,
contact HSL support and do not use the product.
HSL Mini-Matrix Quick Setup Guide
1 2 3
5