HighSecLabs SX42 U-3 Series Quick Setup Manual page 23

Table of Contents SECTIONS
OPERATION - 8-PORT ADVANCED PRESETS
Preset #2 { L Ctrl | L Ctrl | F11 | F2 } (applicable for both 4P and 8P)
•
Two displays/monitors (monitors 1 and 2) are connected to the primary and secondary
console ports.
•
Eight single-display sources (PC s1-8) are connected to the Mini-Matrix source ports 1-8.
•
The displays/monitors are aligned vertically so that the secondary screen is on top of the
primary screen.
•
The VDT mouse cursor movement axis is vertical.
Highlights:
•
Use the source selection panel to choose which sources to display.
•
Switch between selected sources by dragging the mouse cursor vertically.
Preset #3 { L Ctrl | L Ctrl | F11 | F3 }
•
Two displays/monitors (monitors 1 and 2) are connected to the primary and secondary
console ports.
•
The dual-display source (PC 1) is connected to the Mini-Matrix source ports 1 and 2.
•
Single-display sources (PC 2-7) are connected to the Mini-Matrix source ports 3-8.
•
The displays/monitors are aligned horizontally so that the secondary screen is on the right of
the primary screen.
•
The VDT mouse cursor movement axis is horizontal.
Highlights:
•
Use the source selection panel to choose which sources to display.
•
Switch between selected sources by dragging the mouse cursor vertically.
HSL Mini-Matrix Quick Setup Guide
1 2 3
23