8Xt_Fr], [8Xt_Fi], And [8Xt_Mo] Presets - L-Acoustics 8XT Coaxial Enclosure User Manual

8XT
COAXIAL ENCLOSURE
user manual
VERSION 1.2
Figure 5: Eight 8XT enclosures connected to an LA4 controller
7.2.2

[8XT_FR], [8XT_FI], and [8XT_MO] presets

The [8XT_FR] preset features a low and high frequency shelving equalization (FOH applications).
The [8XT_FI] preset results in a nominally flat contour in free field conditions (speech reinforcement, classical music, or fill
distributed applications).
The [8XT_MO] preset results in a nominally flat contour in half-space loading conditions (floor monitoring as well as wall
or ceiling-mounted applications).
Activate the LOAD PRESET menu from the LA4 amplified controller front panel and then select the desired preset.
Refer to the ''LA4 - User Manual'' for additional instructions. The preset is also accessible using the LA NETWORK
MANAGER software (refer to ''LA NETWORK MANAGER - User Manual''). Accessible controls in ''FULL
RANGE'' mode are shown in the following chart:
LA4 Inputs/Outputs Elements to connect
IN A
IN B
OUT 1
OUT 2
OUT 3
OUT 4
* IN: input signal. A: channel A.
8XT_UM_ML_1.2
OUT 1 (in A)
Table 2: Accessible controls in ''FULL RANGE'' mode
Preset
assignments*
Input signal A IN_A
Input signal B IN_B
8XT enclosure PA_A
8XT enclosure
PA_A
8XT enclosure
PA_B
8XT enclosure
PA_B
B: channel B. PA: passive enclosure.
w w w . l - a c o u s t i c s . c o m
OUT 2 (in A)
OUT 3 (in B)
Accessible (O) and blocked (X) controls
Mute
X
X
O
O
O
O
OUT 4 (in B)
Gain Delay Polarity
O O O
O O O
O O O
O O O
O O O
O O O
12 en