Removing The M.2 2230 Solid-State Drive - Dell Inspiron 14 5410 Service Manual

Steps
1. Remove the screw (M1.6x2.5) that secures the solid-state drive bracket to the palm-rest and keyboard assembly.
2. Turn the solid-state drive bracket at an angle of 180 degrees.
3. Insert the solid-state drive bracket into the other solid-state drive bracket slot on the palm-rest and keyboard assembly.
4. Replace the screw (M1.6x2.5) that secures the solid-state drive bracket to the palm-rest and keyboard assembly.
5. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
6. Slide the solid-state drive firmly into the solid-state drive slot at an angle.
7. Replace the screw (M2x3) that secures the solid-state drive to the solid-state drive bracket.
8. Adhere the tape that secures the antenna calbe to the palm-rest and solid-state drive.
Next steps
1. Install the base cover.
2. Exit Service Mode.
3. Follow the procedure in

Removing the M.2 2230 solid-state drive

Prerequisites
1. Follow the procedure in
2. Enter Service Mode.
3. Remove the base cover.
About this task
The following image indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal
procedure.
30 Removing and installing components
After working inside your
Before working inside your
computer.
computer.