Dell Inspiron 14 5410 Service Manual page 69

Table 9. System setup options—Power menu (continued)
Power
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Thermal Management
USB Wake Support
Wake on Dell USB-C Dock
Block Sleep
Lid Switch
Enable Lid Switch
Power On Lid Open
Intel Speed Shift Technology
Table 10. System setup options—Security menu
Security
Intel Platform Trust Technology
Intel Platform Trust Technology On
PPI Bypass for Clear Commands
Clear
Default: Adaptive. Battery settings are adaptively optimized based on your
typical battery usage pattern.
Enables Advanced Battery Charge Configuration from the beginning of the
day to a specified work period. Advanced Battery Charged maximizes battery
health while still supporting heavy use during the work day.
Default: OFF
Enables the cooling fan and processor heat management to adjust system
performance, noise, and temperature.
Default: Optimized. Standard settings for cooling fan and processor heat
management. This setting is a balance of performance, noise, and temperature.
Enables connecting a Dell USB-C Dock to wake the computer from Standby.
Default: ON
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enable or disable the lid switch.
Default: ON
Enables the computer to power up from the off state whenever the lid is
opened.
Default: ON
Enables or disables the Intel Speed Shift Technology support. Setting this
option to enable allows the operating system to select the appropriate
processor performance automatically.
Default: ON
Enable or disable the Intel Platform Trust Technology (PPT) feature in the OS.
Default: ON
Enables or disables the Trusted Platform Model (TPM) Physical Presence
Interface (PPI). When enabled, the OS will skip BIOS Physical Presence
Interface (PPI) user prompts when issuing the Clear command.
Default: OFF
Enables or disables the computer to clear the PTT owner information, and
returns the PTT to the default state.
Default: OFF
System setup 69