Dell Inspiron 14 5410 Service Manual page 70

Table 10. System setup options—Security menu (continued)
Security
SMM Security Mitigation
Data Wipe on Next Boot
Absolute
UEFI Boot Path Security
Table 11. System setup options—Passwords menu
Passwords
Admin Password
System Password
NVMe SSD0
Password Configuration
Upper Case Letter
Lower Case Letter
Digit
Special Character
Minimum Characters
Password Bypass
Password Changes
Enable Non-Admin Password Changes
70 System setup
Enables or disables additional UEFI SMM Security Mitigation protections.
Default: OFF
NOTE: This feature may cause compatibility issues or loss of functionality
with some legacy tools and applications.
When enabled, the BIOS will schedule a data wipe cycle for all storage devices
connected to the system board on the next reboot.
Default: OFF
Enables, disables or permanently disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute Software.
Default: Enabled
Determines if the system will prompt the user to enter the admin password (if
set) when booting to a UEFI boot path device frim the F12 boot menu.
Default: Always Except Internal HDD.
Enables you to set, change, or delete the administrator (admin) password. The
admin password enables several security features
Enables you to set, change, or delete the system password.
Enables you to set, change, or delete the NVMe SSD0 password.
Enforces password restriction that the password must contain at least one
upper case letter.
Default: OFF
Enforces password restriction that the password must contain at least one
lower case letter.
Default: OFF
Enforces password restriction that the password must contain at least one
digit.
Default: OFF
Enforces password restriction that the password must contain at least one
special character.
Default: OFF
Controls the minimum number of characters allowed for password.
Default: 04
Bypass the System (Boot) Password and the internal hard drive password
prompts during a system restart.
Default: Disabled
Enables or disables the user to change the system and hard drive password
without the need for admin password.
Default: ON