Dell Inspiron 14 5410 Service Manual page 72

Table 13. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on AC
Auto On Time
Table 14. System setup options—Keyboard menu
Keyboard
Numlock Enable
Enable Numlock
Fn Lock Options
Lock Mode
Keyboard Illumination
Keyboard Backlight Timeout on AC
Keyboard Backlight Timeout on
Battery
Table 15. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter warnings
Enable Adapter warnings
Warnings and Errors
USB-C Warnings
72 System setup
Displays the Service Tag of the computer.
Creates a system Asset Tag that can be used by an IT administrator to
uniquely identify a particular system. Once set in BIOS, the Asset Tag cannot
be changed.
Enables or disables basic checks when AC power is applied to the device. The
checks include determining how the AC Recovery option is set. The system will
boot up if Wake on AC is enabled, the system will power off, if Wake on AC is
disabled.
Default: OFF
Controls automatic powering up of system for defined days and times.
Default: Disabled
Enables or disables Numlock when the computer boots.
Default: ON
Enables or disables the Fn lock mode.
Default: ON
Controls operation of function keys F1-F12.
Default: Lock Mode Secondary
Enables the user to change the keyboard illumination settings.
Default: Bright
Enables the user to define the timeout value for the keyboard backlight when
an AC adapter is plugged into the system.
Default: 1 minute
Enables the user to define the timeout value for the keyboard backlight when
the system is operating only on battery power.
Default: 1 minute
Enables or disables the computer to display adapter warning messages when
adapters with too little power capacity are detected.
Default: ON
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt, and wait for user input
when warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Specify the maximum number of characters allowed for Admin password.