Intended Use - Advanced Bionics Slim HP Instructions For Use Manual

The Slim HP Color Cap snaps in place on top of the
headpiece securely covering the magnet well and the
microphone. There are two sizes of Slim HP Color Caps:
Standard and Large. The Standard Color Cap is for use
with the smallest Slim HP Magnets: Standard Magnet sizes
1 through 5 and 3D Magnet sizes 1 through 4. The Large
Color Cap is for use with the largest Slim HP Magnets:
Standard Magnet sizes 6 and 7 and 3D Magnet sizes 5,
6, and 7.

Intended Use

The Slim HPs are intended to transfer sound signals and
power between your Advanced Bionics' cochlear implant
and sound processor. A microphone embedded in the
Slim HP Mic and Slim HP AquaMic, if enabled, allows the
headpiece to also function as a sound input source.
The intended users of the Slim HPs are users of the
Neptune, Naída™ CI Q, Naída™ CI M, or Sky CI™ M
sound processors. The intended use environments of the
Slim HPs are healthcare and daily living environments.
Compatibility
The Slim HPs are compatible with Neptune, Naída CI Q,
Naída CI M, or Sky CI M sound processors from
Advanced Bionics.
Operating Instructions
Assembly Instructions
To operate your headpiece with your cochlear implant
system you will need to install a Slim HP Magnet and
attach a Slim HP Color Cap, as follows:
7