2. Kore 7th / kHLab Device installation
2.1. Proper device setup and installation
For optimum performance, the height difference between the kHLab device and the
water level surface from where the device will take the water sample for testing should
NOT exceed about 50-60cm (20-24") and connection tubing length between the kHLab
module and Kore 7th doser should NOT exceed 100cm (59").
The kHLab device can be mounted directly on a wall with the supplied wall mount, or it
can operate sitting on a flat surface.
1
2
2.2. Kore 7th Connection Ports
3
4
5
Kore 7th Ultimate Wi-Fi dosing station
Kore 7th Dosing Station back panel
Page 5
Kore 7th Manual / kHLab Edition
6
7