X 10.2.4 Or Greater - Brother MFC-5440CN Quick Setup Manual

Step 2
For USB Interface Cable Users
For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 11.
For Mac OS
upgrade to Mac OS
(The latest information for Mac OS
visit at: http://solutions.brother.com)
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
interface cable.
(Example for the U.K.)
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the printer driver, Scanner driver and
Remote Setup program. If the language
screen appears, select your language.
5
Click MFL-Pro Suite to install.
20
Installing the Driver & Software
®

X 10.2.4 or greater

®
X 10.2.0 to 10.2.3 user, please
®
X 10.2.4 or greater.
®
if you already connected an
®
.
6
Follow the on-screen instructions, and
restart your Macintosh
®
X, please
7
After the DeviceSelector window appears,
connect the USB interface cable to your
Macintosh
The DeviceSelector window will not appear if
the USB interface cable has been connected
before restarting your Macintosh
overwriting a previously installed version of
the Brother Software. If you encounter this
problem continue with the installation skipping
step 10 and then see the Software User's
Guide Chapter 8 for details on selecting what
machine the ControlCenter2.0 will connect
with.
To connect the USB cable to the machine:
1. Lift the scanner cover to its open
2. Connect the USB cable into the USB
®
.
®
and then to the machine.
position.
socket, marked with a
will find the USB socket above and to the
left of the ink cartridge slots, as shown
below.
®
or if you are
symbol. You