Important Safety Precautions; Initial Start-Up - Intimus 14.95 Operating Instructions Manual

GB
<< The machine may not be operated by more than
one person at any given time!
The machine was designed for safe operation by "one
person only".
<< During the shredding process no other work
may be performed on the machine (for example
cleaning, etc.)!
<< The machine is not a toy, and is not suitable for
use by children!
The overall technical safety concept of this machine
(dimensions, feed openings, emergency shutdown
devices etc.) does not provide for any guarantee
regarding hazard-free operation by children.
APPLICATION:
The 14.95 shredder is used in all areas where
large quantities of printed material need to be
shredded.
The machine can shred cardboard and crumpled
paper as easily as it shreds smooth paper.
3 4
2
fig. 7

IMPORTANT SAFETY PRECAUTIONS

INITIAL START UP
CAUTION: The shredder should only
be fed with paper or cardboard!
Shredding other data carriers can cause
injury(e.g. by splintering of hard materi-
als) or may damage the shredder (e.g.
destruction of the cutting system).
Make sure that no loops occur when
feeding strip material. Danger of injury!
5
POWER SUPPLY CONNECTION:
a) The maximum value for loop impedance at the
mains connection point is 0.5 Ohms.
b) The conductor cross-section of the power
supply line should be of a magnitude so as
to cause a 15% voltage drop in the case of a
machine blockage (inhibit current = 3 x nominal
current).
1
<< Danger of injury! Keep all loose articles of
clothing, ties, jewelery, long hair or other
loose objects away from opening!
<< Danger of injury! Never insert fingers into opening!
<< In case of danger switch the machine off with the
mains switch, or with the emergency switch, or
unplug the machine!
<< Always unplug the machine from the mains power
supply before opening the machine!
Repairs may only be performed by trained perso-
nnel!
CHECKING THE RUNNING DIRECTION:
1. Switch on the main switch (1) (fig. 8); i.e. to
2. Place rotary switch (2) in position „1" (fig. 7).
3. Check that the shredder is running in the correct
Now that everything has been correctly assembled
and connected, you can proceed to operating
the machine.
7
position „1".
direction and correct the phase relation of the
power plug if necessary.
Correcting the phase relation of the
power plug may only be carried out
by a qualified electrician!
14.95