Service And Maintenance; Standards And Guidelines; Eu-Directives; Fcc - Siemens ATI510 Installation Manual

Intrusion arming terminal
Table of Contents

Advertisement

Standards and Guidelines

2.2.4

Service and Maintenance

3
Standards and Guidelines
3.1

EU-Directives

3.2

FCC

6
Building Technologies
Fire Safety & Security Products
The environmental conditions recommended by the manufacturer must be
observed.
The device should only be used for indoor applications.
Connect the device only to power sources with the specified voltage. Voltage
supply requirements can be found on the rating label of the device.
Protect the device against moisture.
Do not attempt to service or modify this device yourself. Refer this work to
qualified service personnel.
This product complies with the requirements of the following European directives.
The EU declaration of conformity is available to the responsible agencies at:
Siemens Building Technologies
Fire & Security Products GmbH & Co. oHG
76181 Karlsruhe
Germany
European Directive 2004/108/EC „Electromagnetic Compatibility"
Compliance with the European Directive 2004/108/EC has been proven by testing
according to the following standards:
Emitted interference:
Interference resistance:
This equipment complies with the FCC Rules CFR 47 Part 15 Emission Class B
limits.
This equipment has been tested and found to comply with the limits for a Class B,
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turnings the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate receiving antenna.
EN 55022 class B
EN 50130-4
020_ATI5100_A6V10235012_a_en
23.09.2009

Advertisement

Table of Contents
loading

Table of Contents