Installation
8.4
Mounting the cover
8.5
Programming and firmware download
14
Building Technologies
Fire Safety & Security Products
1. Hook the top of the cover into the base and push downward.
2. Push back the upper part of the housing.
3. The two lugs on the base engage with the corresponding recesses in the cover.
4. Tighten the two screws at the bottom of the unit and seal them using the
supplied seals.
Close unit
The ATI5100 is programmed using SiPass integrated software, via the AC5100, or
using the standalone FLN Configurator application. Please refer to the appropriate
User's Manual for more information.
020_ATI5100_A6V10235012_a_en
23.09.2009