Home - Mantracourt T24-RM1 User Manual

Home

We now have successful communications with the base station so we can now pair with our device or we can
select the Spectrum Analyser mode or Data Provider Monitor mode.
Pairing Procedure
Remove power from the T24-RM1 module.
•
Click the Pair button on the toolkit.
•
You now have 10 seconds to re-apply power to the T24-RM1 module.
•
If you connect successfully the toolkit will change to the Information page.
If the pairing fails try again.
NOTE: The act of Pairing with the toolkit will not change the radio configuration settings of the connected
device. The settings will only change if you change them yourself within the toolkit.
Mantracourt Electronics Limited T24-RM1 User Manual
7