Table of Contents
Advertisement
Getting Started
To be able to see the totals from acquisition devices supplying data to the T24-RM1 and to avoid entering error
mode due to timeouts, we must first ensure that the appropriate modules are transmitting their values at a
suitable rate such as the default of 3 per second. Then we can configure the T24-RM1 to use the data from
these devices.
Configuration must be done with the T24 Toolkit software and a base station.
Connections & Indicators
You will need to connect power to the T24-RM1 for it to operate. Only power is required to enable
configuration using a base station and the appropriate toolkit software.
RELAY 1
9 – 32 V Supply
LEDs
Mode
Flashes 2 x per second when operational
Activity
Flashes when T24 data packets are received
Time Out
No T24 data present for longer than user defined period
Error
Remote T24 error from any defined T24 input device
Relay 1
Relay 1 Energised (Connection between COM and NO)
Relay 2
Relay 2 Energised (Connection between COM and NO)
Inputs
Digital Input 1 Can either reset a latched relay 1 or transmit a Data Provider Packet of a specified Data Tag
Digital Input 2 Can either reset a latched relay 2 or transmit a Data Provider Packet of a specified Data Tag
Digital Input 3 Resets both latched relays
Mantracourt Electronics Limited T24-RM1 User Manual
3
RELAY 2
Pair
DIGITAL INPUTS
Mode
Activity
Time Out
Error
Relay 1
Relay 2
DIGITAL INPUT
ALARM RELAY
Advertisement
Table of Contents
