Input Settings - Mantracourt T24-RM1 User Manual

Input Settings

Here you can set the Data Tags of the data used as the inputs.
The description in green below the 'Relay1' and 'Relay2' captions indicate the way in which the values from
the Data Tags will be used to compare against the setpoint to determine whether the relay will activate.
See the Relay Operation Settings section for details.
Items you can change:
Relay1DataTag[1-8]
Relay2DataTag[1-8]
Zero Offset [1-2]
Mantracourt Electronics Limited T24-RM1 User Manual
Enter up to eight Data Tags the data from which will be used to determine the
value compared to the set point to control relay 1.
Enter up to eight Data Tags the data from which will be used to determine the
value compared to the set point to control relay 2.
This value will be subtracted from the total of the summed data from the data
tags for Relay 1.
12