1265 (RH-104)
RF Description and Troubleshooting
Cell Receiver Check from RF to DVGA
Use the following values to check the CDMA Cell Rx functionality from RF to IQ
output.
1. Start FTM in Local Mode with only the Rx path turned on and set
LNA_GAIN_STATE=0.
2. Inject a –91 dBm CW signal of 881.52 MHz.
3. Get DVGA value from FTM dialog box. The value should approximate 2200.
Page 14
© 2007 Nokia Corporation
Company Confidential
Issue 1 04/2007