Page 1
PMR-446 HANDHELD TRANSCEIVER INSTRUCTION MANUAL License-free PMR-446 two-way radio for instant free communication! English...
Page 2
INDEX Page no. LEGAL INFORMATION CHARACTERISTICS UNPACKING AND CHECKING THE EQUIPMENT GETTING STARTED 4.1.- CHARGING THE BATTERY PACK 4.2.- INSTALLING / REMOVING THE BATTERY PACK 4.3.- INSTALLING THE BELT CLIP GETTING ACQUAINTED OPERATION AUXILIARY FUNCTIONS 7.1.- TIME-OUT TIMER 7.2.- BATTERY SAVE 7.3.- LOW BATTERY WARNING 7.4.- MONITOR (SQUELCH) 7.5.- ANALOGICAL CODES (QT) AND DIGITAL CODES (DQT)
1.- LEGAL INFORMATION: This transceiver is designed for free communication, so it is not necessary to purchase administrative authorization or licences in order to use it and it is intended for use in the following Member States of the European Union: This equipment complies whit Directive 2012/19/EU on waste electrical and electronic equipment (WEEE).
Carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packaging. If any items are missing or damaged, contact with your salesperson immediately. Supplied accessories: Item Quantity PMR-446 Transceiver Li-Ion battery packs (1000 mAh). Belt clip. AC/DC adapter. Cable. Desktop battery charger.
installed in the transceiver. Using the transceiver while charging may interfere with the correct charging. - The battery pack life is over when it’s operating time decreases even though it is fully and correctly charged. In this case, replace the battery pack with a new one with the same characteristics as that supplied with the transceiver.
7.- AUXILIARY FUNCTIONS: 7.1.- TIME-OUT TIMER: This function prevents any single user from transmitting on a channel for an extended period of time. If you continuously transmit for 10 minutes, you will hear a warning tone and the transceiver will stop the transmission. To disable the tone, release the [PTT]. You can press [PTT] again to resume transmission.
Note: - Although using channels set up with QT/DQT tones prevents you from listening to unwanted calls, it does not mean that your calls are totally private. - Consult whit your salesperson for the programming of analogical (QT) and digital (DQT) codes.
Need help?
Do you have a question about the PMR-446 and is the answer not in the manual?
Questions and answers