Table of Contents
Advertisement
6. MENU FUNCTION LIST (MENU)
Press DISPLAY/ MENU for more than 3 seconds to access the menu. "Menu" will appear in the
display momentarily. Navigate the menu by pressing DISPLAY/ MENU momentarily to move
forward to the next option. The menu can also be navigated by using the Tuning Up or Tuning
Down Button to move to the next or previous option. Once the desired option appears in the
display, adjust that option by rotating the volume control within 5 seconds. The following options
are adjusted through this menu feature.
Contrast
The contrast level of the display is set at "CONTRAST 05" by default. Rotate the volume control To
adjust the contrast level from 00 to 10.
Dimmer
The dimmer feature of the display is set to "DIMMER High" by default. Rotate the volume
Control to turn the dimmer to the Iow setting.
Clock Format
This option allows selection of a 12 hour or 24 hour clock format. "CLK FORMAT 12H" is the
Default setting. Rotate the volume control to change to the 24 hour clock format.
Time Set
The time on the clock will be set to 12:00 as the default. Program the current time by rotating
the volume control clockwise to adjust the minutes and counterclockwise to adjust the hours.
AREA (TUNER FREQUENCY SPACING)
This option allows the selection of the frequency spacing appropriate for your area. "
U.S.A
.
" is the default setting. Rotate the volume control to select the U.S.A. Latin America, Europe
or Oirt options.
Programmable Turn-on Volume (VOL PGM)
This option allows selection of the volume level the radio will automatically assume when first
turned on. "VOL PGM 12 " is the default setting, which will turn the radio on at the volume level
selected when the unit was last turned off.
To program a specific volume level for the radio to turn on at, rotate the volume control to select
"VOLUME LEVEL ". Within 5 seconds.
Beep Tone
The beep tone feature allows the selection of an audible beep tone to be heard each time a
button is pressed on the face of the radio. "BEEP TONE On" is the default display. Rotate the
volume control to select the "BEEP TONE Off" option.
Illumination Color (COLOR)
This option allows selection between two colors for the backlight illumination of the unit.
"COLOR 1" is the default display and will illuminate the unit in blue backlight. Rotate the
volume to select "COLOR 2",, which will illuminate the display in red backlight.
Selectable Clock Display (CLK ON LCD)
When the selectable clock display feature is activated, the clock and default greeting note will
appear in the display when the radio is turned off but the ignition switch is still on . "CLK
ON LCD On" is the default display for this option. To select that the clock and greeting not be
displayed when the unit is powered off, rotate the volume control to select "CLK ON LCD Off".
Key Illumination On/Off (KEY LIGHT)
The Key Light on/off feature controls how the front panel buttons illuminate when the unit is
turned off, but the ignition switch is on. When the Key Light feature is activated with the unit
turned off and the ignition turned on, the front panel buttons will illuminate. When the Key Light
feature is deactivated with the unit turned off and the ignition switch turned on, the front panel
buttons will not illuminate.
E - 10
AREA
Advertisement
Table of Contents
