Greeting Note - Boss Audio Systems 4600 User Manual

Personal Text Message
Press the MENU button you will see the "PTM" on the display ,this will allow the user to input
desired . greeting note on the display. The "INPUT MESSAGE" will be displayed by default. User is
allowed to input max. 20 letters or symbols for the "PTM" to be displayed on the LCD.
When "PTM" is displayed on the display, Press "ENTER" button to start up the "PTM" enter
procedure. Rotate the encoder volume to input A to Z 0-9, +/- ! etc. Press "ENTER" button to
confirm the first letter input. Repeat the procedure enter the rest of the letters. If you want to
change the inputted letters , you can press Tuning up /down button to move, the cursor
backwards to change the inputted letters. If no more buttons are pressed after 7 seconds the
entered letters will be automatically set as PTM. The previous PTM will be erased automatically
once a new PTM is entered.
Press "DISPLAY" button sequential (Frequency -> Spectrum -> Animation 1 -> Animation 2 ->
PTM ). The inputted Message will scroll through the LCD continuously until a new operation of the
unit has been entered.

GREETING NOTE

There are three different greeting notes displayed on LCD based on different condition.
1.When the unit is powered on, one of three greeting will display based on the time of day: Good
Morning, Good Afternoon or Good Evening.
2. When the unit is powered off but the ignition remains on, the LCD will scroll through the
following messages if the selectable clock display feature is activated: "Enjoy Driving! Have a
Safe Trip!"
3. When the ignition is turned off, the message "See you! Have a nice day!" will be displayed
Before the unit turns off completely.
IGNITION OFF CLOCK RECALL
The user can recall to display the clock by pressing DISPLAY button, even when ignition is off.
E - 11