Table of Contents
Advertisement
4. RDS MENU
To access the RDS-MENU press the SELECT button
can be selected
- Auto Seek All / RDS
- TA Seek On / Off
- TA Volume 0-40 (default 18)
- Regional On / Off
Steps to access Menu items :
1) To access the RDS MENU press the SELECT button
2) "RDS-MENU" will be displayed on display for 2 seconds, and then "Auto Seek" appears on
display.
3) To navigate through the MENU use the >>| or |<< buttons to navigate down or up through the
menu items. Or Press SELECT BUTTON repeatedly to view the menu item sequential
4) Use the Volume up/down button to adjust the selected menu item.
5) After the selected menu item(s) has been changed and no other operation have been made, a 5
second time-out will resume the head unit to the previous mode.
Features description of RDS-Menu Items :
-
Auto seek RDS/All
Auto Seek "RDS" will be displayed by default. The user now has 5 seconds to adjust by
using volume up/down from "RDS" to "ALL ". If "ALL " is selected, during the Auto Seek
tuning mode, the unit will stop at all radio station including Non RDS station regardless AF
and TA
are
switched on. If "RDS"
mode
, the
unit will stop at only RDS station.
-
TA seek On/Off
TA Seek "On" will be displayed by default The user now has 5 seconds to adjust by using
volume up / down from "On" to "Off". If selected "On" mode, when a received station does
not have TP information for 60 seconds, the unit
which does not have the same station (PI), but has the TP information. When a TP
information get lost at the current station over the default retune time (60 seconds), the unit
starts
to search to next same PI station. When the same PI station does not catch in 1 cyclic
search, the unit retunes to next station with TP information.
If "Off" is selected, when a received station dose not have TP information for 60 seconds, a
Double Beep Sound (Alarm) is
mode is not activated.
Note: This function only activate when "TA" switches on mode.
- TA Volume
TA Volume "18" will be displayed by default. The user now has 5 seconds to adjust by
using volume up/down button from "0-40". When TA function is activated, if a TA program is
tuned in at the volume level set regardless of the volume of the other source at the time.
Note: When the unit tuned into a TA program. The volume level can only be increased but
cannot be decreased.
- Regional On/Off
REGIONAL "OFF" will be displayed by default. The user now has 5 seconds to adjust by
using volume up/down button from "off" to "On" . If "on" is selected when the AF search or
PI seek, it will implemente to station which have all the PI codes which are the same as
current station.. If "off" is selected, when AF search or PI seek the regional code in the
format PI code will be ignored. A regional station is possible to be received.
Note: The Regional function On/Off Setting is valid when the "AF" function is "on"
is
selected and the AF is on, during the Auto Seek tuning
automatically searches
heard
and the LCD will be
E - 15
for
3 seconds. The following list of features
for
3 seconds.
display
"Lost TP TA" but the retune
.
if
to next station
Advertisement
Table of Contents
