Table of Contents
Advertisement
S E T T I N G U P T H E M A C H I N E A N D C O M P U T E R T O W O R K T O G E T H E R
If you are using Windows
Computer. you may see "New Hardware Found Brother MFC-9750"
during startup.
You can select "Do not install a driver (Windows
again)." and click OK, so Windows
again
—OR—
If you see "Update Device Driver Wizard", Click Next to bypass the
®
Windows
Plug and Play Printer Driver screens, followed by Finish.
If you are using Windows
Wizard" during startup, follow the instructions from the installer, then
click Next. Click Finish when it appears on the screen.
Installing MFC-9750 Printer Driver
If you are using Windows NT
1
Insert the CD-ROM for the MFC-9750 printer driver into your CD-
ROM Drive.
2
Click the Start button in the Task bar.
3
Select Run.
4
Enter X:\winnt\setup (where X is your CD-ROM Drive).
®
95, after you connect Brother machine to
®
will not display this dialog box
®
98, you may see the "Add New Hardware
®
Workstation Version 4.0:
®
will not prompt you
33
Advertisement
Table of Contents
