Table of Contents
Advertisement
Invacare® NordBed™ Kid
4 Transportation and Storage
4.1 Dismounting the Mattress Support
Platform
IMPORTANT!
Before dismounting
– Ensure the brakes are engaged.
– At least two persons are needed to dismount
the mattress support platform as it must be
supported in both ends.
1. Raise the bed to its highest position and unplug the
bed from the mains.
2.
Press in the two latches A on the control unit with a
pointed object (e.g. screwdriver) and open the lid.
3.
Unplug the cables of the mattress sections actuators
from the control unit and close the lid of the control
unit.
The number of actuator cables to unplug
depends on the configuration of the bed. Do
not unplug the cable of the height adjustment
actuator and the hand control. See 5.4 Control
Unit, page 13.
4. Connect the bed to the mains and lower it to its
lowest position.
10
A
b.
a .
5.
On both sides of the mattress support platform pull
the red locking pin and turn it 45° clockwise to engage
it in the unlocked position.
6.
b.
a. In the foot end, lift the mattress support platform
off the lifting mechanism.
b.
In the head end, slide the lifting mechanism
gliding blocks out of the guideways on the mattress
support platform.
7.
Lift the mattress support platform off the base.
a .
b.
a .
60126225-A
Advertisement
Table of Contents
