Operation; Starting The Trimmer - Toro 51831 Manual

Operation

Starting the Trimmer

1. Make sure that the vents on the trimmer are
clear of any dust and debris.
1. Trimmer venting areas
2. Align the cavity in the battery pack with the
tongue on the handle housing
3. Push the battery pack into the handle until the
battery locks into the latch
1. Battery latch
4. To start the trimmer, squeeze the lockout trigger,
then squeeze the run trigger
Figure 8
(Figure 9).
(Figure 9).
Figure 9
(Figure 10).
1. Lockout trigger
Shutting Off the Trimmer
To shut off the trimmer, release both triggers.
Whenever you are not using the trimmer or are
transporting the trimmer to or from the work area,
remove the battery pack.
Removing the Battery Pack
from the Trimmer
g330191
Press the battery latch on the machine to release the
battery pack and slide the battery pack out of the
machine (Figure
1. Battery latch
g330417
12
Figure 10
2. Run trigger
11).
Figure 11
g330416
g331067