Installing The Guard - Toro 51831 Manual

3

Installing the Guard

Parts needed for this procedure:
1 Guard
–
Screwdriver (not included)
Procedure
1. Using a Phillips head screwdriver, remove the 2 screws, 2 washers, and 2 spacers from the trimmer
base (A of Figure
2. Align the guard onto the trimmer base (B of
3. Secure the guard onto the base of the trimmer with the 2 screws, 2 washers, and 2 spacers previously
removed (C of Figure
5).
4).
Figure 5).
Figure 5
10
g330190