Multiple Speaker Systems; Setting Up Additional Rooms; Using Multiple Systems In The Same Expansion Room; Changing The Room Code - Bose Lifestyle Homewide Owner's Manual

English Español

Setting up additional rooms

®
The PERSONAL music center II and your speaker
system must have identical room codes. Both are set at
the factory for room code C. If room code C is already
®
used by another Bose link product in your home, you
need to change both items to another room code.
Using multiple systems set to
the same room code
To make multiple systems operate as one system:
• Make sure each system has the same room code.
• Leave switch C (Primary) down on one system and
push it up (Secondary) on all other systems.
Primary/Secondary unit:
Up = Secondary
Down = Primary
Acoustimass ® module
connector panel
Français
Room code
switches
U M
SING ULTIPLE

Changing the room code

To change the speaker system room code, change the
switch settings on the connector panel to another room
code. Then make sure you change the room code
setting in the controller. Refer to "Setup mode" on
page 20.
Room Room
S S
PEAKER YSTEMS
33